Installation of inflatable structures

Installation of inflatable figures

High-quality installation of an inflatable structure is probably the most responsible and important moment in her life. The service life of the product itself, safety and safe operation directly depend on the correct installation of the inflatable figure. You need to understand that almost always the stability of an inflatable figure depends not only and not so much on the quality of materials, but on reliable and correct installation. Despite the seemingly simple installation of an inflatable figure, it also has its own subtleties and nuances.

Types of installation of inflatable figures and pneumatic structures

Depending on the dimensions, location or installation of the inflatable figure, the options and methods for attaching the pneumatic structure may differ in some technical nuances. For ground installation, anchors, sandbags, etc. are used.

If the installation of an inflatable figure or structure is carried out on the roof of a building, then anchors, stretch marks for fixing to the floor and walls can also be used.

An important nuance when installing pneumatic figures and inflatable structures

In the working position, the inflatable structure has a fairly large windage due to its size. This nuance must be taken into account when choosing an installation location. If an inflatable figure is installed on the roof of a building, special attention should be paid to the reliability of fixing the pneumatic structure and the power cable.

Based on practical experience, we can say that inflatable structures with a not very large surface area function stably in a decent wind. If the pneumatic structure is sufficiently voluminous, i.e., has a large windage, then the limiting wind speed should not exceed 7 m / s. But, again, in these calculations, the strength of the fasteners and the size of the installation site must be taken into account.

How is the installation of an inflatable figure

In fact, during installation, it is necessary to inflate the structure, put it in the right position and tie the ropes to the sides. But it all needs to be done right.

It is very important - during the installation process, you must not tear, stain or "give the wind" the shell when inflated. First, the fastening ropes are evenly stretched for all loops so that the structure is precisely and safely in the desired position.

It is very important at the same time to securely tie all the ropes at the right angles both relative to the ground and relative to the direction of the mounting loops of the structure. Since the sites for installing the inflatable structure are different, it is necessary to correctly select and mount the fasteners.

But the most important task is to prevent the fixing elements from tearing out of the base of the site itself or the movement of ballast weights. How exactly to do this is described in detail in the instructions that each product is equipped with.

To order the service of installing an inflatable figure or pneumatic structure, write to us or call us.